How to configure PPPoE on TP-Link ADSL Modem Router

Step 1 Open your web browser and enter the IP address of the device in the address bar (default is 192.168.1.1) then press Enter.

Step 2 Enter the login name and password in the login page, the default username and password are all lowercase admin, then click OK to log into the device.

Step 3 Click on Quick Start at the top.

Step 4 Press RUN WIZARD and click NEXT to configure your ADSL Router

Step 5 You can change the admin password by entering a new password. If you do not like to change, enter the default password and press NEXT.

Step 6 Select the correct time zone and press NEXT.

Step 7 Select PPPoE / PPPoA and click NEXT.

Step 8 Enter the Username and Password provided by your Internet service provider. Enter the correct VPI and VCI values ​​provided by your Internet service provider. Then hit NEXT.

For articles that support the service configuration as well as the type of equipment you can refer to :

Step 9 If your ADSL router supports wireless connectivity and you want to connect to the device over a wireless connection, please select Access Point Activated and configure security. Here we use WPA-PSK, TKIP / AES as an example. Enter your password and press NEXT.

Step 10 Press NEXT and Close to save the settings.

 

Leave a Reply

Your email address will not be published. Required fields are marked *